Rikaline CF GPS Receiver Bedienungsanleitung PDF herunterladen (Seite 5)

- -

charge, LED 1 will show blue color and flash.

2.2. Turn on/off

Turn on To turn on the receiver, press the power button on the topside briefly

(0.5 seconds). The left LED(LED 2) indicator will flash briefly. The right

LED (LED 1) indicator will start flashing.

Turn off To turn off the receiver, press the power button on the topside for 3

seconds. The LED indicator will flash briefly before switching off the

receiver.

2.3. Charging

Low Power The right LED(LED 1) indicator will turn RED (normally BLUE) when

battery power becomes low. Connect the receiver to a powers source to

continue operation and to recharge the battery.

Charging The left LED(LED 2) indicator will turn RED (or ORANGE) when the

battery is being charged. When fully charged, the RED indicator will

switch off.

2.4. Bluetooth Communication

Waiting to

connect

The right LED(LED 1) indicator will flash if there is no communication

between the receiver and another device.

Connected The right LED(LED 1) indicator will turn to continuous lighting when the

receiver is connected through the wireless link with another device.

2.5. GPS

Navigating The left LED(LED 2) will flash GREEN (or ORANGE when charging) if the

receiver is able to determine the current position.

2.6. PIN CODE

The PIN code means Personal Identification Number for Bluetooth device and it is also

called as Pass Key. The Bluetooth GPS receiver has the default PIN Code, and is “0000”.

Generally speaking, there are two steps in Bluetooth connecting. One is pairing process, the

other is link process. If you need PIN code to pairing and connect, you can use the default pin

code, “0000” to connect Bluetooth device. Our GPS receiver belongs to non-safety connecting,

you can use in general application to finish connecting.

1 2 3 4 5 6 7 8 9 10 ... 18 19

Keine Kommentare

Rikaline CF GPS Receiver Bedienungsanleitung Seite 5